Solid State Model CA Ellipsometer, including Solid State Indicating Temperature Control and adjustable regulated high voltage power supply for photomultiplier tube, complete with standard accessories, schematics, parts list, and two instruction manuals for operation on 110 Volts, 60 Hz or 110 or 220 Volts (not both), 50 Hz current.
Normal delivery is 5-6 months after receipt of order.
The following options are available:
Option Bl – TFS Pin Positioning Sample Holder Bracket
Three pin positioning sample holder for TFS oxide determination. Requires a positioning notch in the sample. These sample holders permit removing a sample for exterior treatment and then replacing the sample back in the Ellipsometer to read the same spot. Typical applications are manual oil coatings and oxide measurements.
Option D – Immersion Heater Tank Thermometer
A useful maintenance device which provides maintenance personnel with the internal tank temperature in order to assure proper tank temperature setting and cleaning action. Accessible from the rear of the instrument, maintenance personnel can determine temperature at a glance.
* Option F – Computer Option
Computer controlled Windows operating system. Allows auto measurement correction via correction constant. Enables user to make small corrections in reported measurement for variance in surface condition and oil types. Also allows testing of 6 or 10 coupon tests reporting data parameters top average, botoom average and total average. Saves and files test data. Compatible with ethernet connection.
Click here for a list of the
Recommended Spare Parts